AVID and Dolby Labs recommended post production monitoring controllers and interfaces.

Thursday 19 October 2017

The TMC-1 Monitor Controller Remote Evolution



The TMC-1 has come a long way since it was released about 3 years ago, to act as a remote to the XMon.  With some of the following changes made over the course of it's lifetime.

  • An Ethernet port was added to allow connection to the DAD AX32.
  • The 15 pin D-Sub was changed to a HD15 pin D-Sub, due to being not able to source the 15 pin D-Sub leads.
  • An external mic input was added.
  • The Display was improved and is now much clearer and readable .
  • An external switch input was added, to allow control of Ext T/B 1, Mute, Dim, SLS mute, Int T/B 1, and Int T/B 2.
  • OSC Control via Tablet or Phone.
  • TMC-1 PC/Mac Setup software, with the ability to load and save different setups.
  • There have been many firmware updates for the TMC-1 adding features and keeping up with the ever changing industry needs.
  • The TMC-1 now connects to the XMon, DAD AX32, Avid MTRX, Trinnov D-Mon, CB A-Mon, Ashly ne8800, and soon the CB I-Mon Immersive Monitor Controller.
 
You are never locked into a fixed solution as the TMC-1 hardware stays the same, for example you can upgrade your system from XMon to Avid MTRX with just the purchase of a upgrade key and a firmware install via USB.

Some of the customer comments we have had are:


  •  "I Love the TMC-1 design and above all the functionality"
  • "The TMC-1 gives us so much flexibility"
  •  "The XMon sounds so much better now I control it with TMC-1"
  • "I love that I don't have to connect my S6 to a computer to control the XMon"
  • "Having a dedicated monitor controller panel in my S6 is so important"
  • "I love having the meters at all times"
  • "After a thorough search the TMC-1 ticked all the boxes"
  • "I spent a year following the TMC-1 before installing it, and nothing else comes close"
  •  "I have installed the TMC-1-XMON remote controller, and again, I have to say that it is quite an impressive piece of equipment it is the perfect companion to the XMON, resulting in the best full featured monitoring solution for audio post".
  •  "It's great having the unified interface no matter which studio we are in stereo to Atmos, we know how to use the monitoring system"
  • "Great product! We love using this device"
  • "The Auto Talkback/Listenback feature is great it makes the glass disappear"
  • "We liked the TMC-1 stand alone so much we added it to several S6 consoles"
  • "The TMC-1 adds functions that arguable should have been there in the first place"


Our customers range from film, TV, Music and video games, to users with D-Commands, S3, S6, and no console, etc.


You can check out the TMC-1 at one of our distributors (link), or if you are at the AES NY 2017 CB Electronics is on Stand 214.



















Monday 9 October 2017

Tuesday 3 October 2017

NEW Product Coming Soon the I-Mon Monitor Controller




TMC-1 +I-Mon

 Immersive Monitor Control System







Analog Immersive Monitor control system for use with the TMC-1 remote. The I-Mon may be used with any format from Stereo to 7.1.4.2 .  The I-Mon incudes  PFL, Talk back and Listen back.




Specification
 


· Main Output 7.1.4 plus Left and Right rear Bass Extension Outputs, One or Two Stereo Alt outputs
· Inputs: 1x 7.1.4, 1x 7.1, 2 x Stereo plus 2 or 3 stereo Cue Inputs
· Cue inputs  available on cue sends and main outputs
· Four Cue outputs - Studio L/S, Headphones, Cue1, Cue 2
· Three Control Room speaker selections
· One/Two Listen back microphone inputs
· One/Two Talkback microphone inputs
· Stereo Down Mix Output
· External Meter Feed
· Stereo AFL Input
· Slate output
· Input Sum
· GPIO






Remotes